/* * curl.c * * Copyright (c) 2005 Paul Guyot * Copyright 2006-2011, 2013-2014 The MacPorts Project * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of MacPorts Team nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #if HAVE_CONFIG_H #include #endif #include #include #include #include #include #include #include #include #include #include #include #include "curl.h" /* * Some compiled-in constants that we may wish to change later, given more * empirical data. These represent "best guess" values for now. */ #define _CURL_CONNECTION_TIMEOUT ((long)(30)) /* 30 seconds */ #define _CURL_MINIMUM_XFER_SPEED ((long)1024) /* 1KB/sec */ #define _CURL_MINIMUM_XFER_TIMEOUT ((long)(60)) /* 1 minute */ #define _CURL_MINIMUM_PROGRESS_INTERVAL ((double)(0.2)) /* 0.2 seconds */ #if defined CURLOPT_ACCEPT_ENCODING #define _CURL_ENCODING CURLOPT_ACCEPT_ENCODING #else #define _CURL_ENCODING CURLOPT_ENCODING #endif /* ========================================================================= ** * Definitions * ========================================================================= */ /* ------------------------------------------------------------------------- ** * Global curl handles * ------------------------------------------------------------------------- */ /* If we want to use TclX' signal handling mechanism we need curl to return * control to our code from time to time so we can call Tcl_AsyncInvoke to * process pending signals. To do that, we could either abuse the curl progress * callback (which would mean we could no longer use the default curl progress * callback, or we need to use the curl multi API. */ static CURLM* theMHandle = NULL; /* We use a single global handle rather than creating and destroying handles to * take advantage of HTTP pipelining, especially to the packages servers. */ static CURL* theHandle = NULL; /* ------------------------------------------------------------------------- ** * Prototypes * ------------------------------------------------------------------------- */ int SetResultFromCurlErrorCode(Tcl_Interp* interp, CURLcode inErrorCode); int SetResultFromCurlMErrorCode(Tcl_Interp* interp, CURLMcode inErrorCode); int CurlFetchCmd(Tcl_Interp* interp, int objc, Tcl_Obj* const objv[]); int CurlIsNewerCmd(Tcl_Interp* interp, int objc, Tcl_Obj* const objv[]); int CurlGetSizeCmd(Tcl_Interp* interp, int objc, Tcl_Obj* const objv[]); int CurlPostCmd(Tcl_Interp* interp, int objc, Tcl_Obj* const objv[]); typedef struct { Tcl_Interp *interp; const char *proc; double prevcalltime; } tcl_callback_t; static int CurlProgressHandler(tcl_callback_t *callback, double dltotal, double dlnow, double ultotal, double ulnow); static void CurlProgressCleanup(tcl_callback_t *callback); void CurlInit(void); /* ========================================================================= ** * Entry points * ========================================================================= */ /** * Set the result if a libcurl error occurred return TCL_ERROR. * Otherwise, set the result to "" and return TCL_OK. * * @param interp pointer to the interpreter. * @param inErrorCode code of the error. * @return TCL_OK if inErrorCode is 0, TCL_ERROR otherwise. */ int SetResultFromCurlErrorCode(Tcl_Interp *interp, CURLcode inErrorCode) { int result = TCL_ERROR; if (inErrorCode == CURLE_OK) { Tcl_SetResult(interp, "", TCL_STATIC); result = TCL_OK; } else { Tcl_SetResult(interp, (char *)curl_easy_strerror(inErrorCode), TCL_VOLATILE); } return result; } /** * Set the result if a libcurl multi error occurred return TCL_ERROR. * Otherwise, set the result to "" and return TCL_OK. * * @param interp pointer to the interpreter. * @param inErrorCode code of the multi error. * @return TCL_OK if inErrorCode is 0, TCL_ERROR otherwise. */ int SetResultFromCurlMErrorCode(Tcl_Interp *interp, CURLMcode inErrorCode) { int result = TCL_ERROR; if (inErrorCode == CURLM_OK) { Tcl_SetResult(interp, "", TCL_STATIC); result = TCL_OK; } else { Tcl_SetResult(interp, (char *)curl_multi_strerror(inErrorCode), TCL_VOLATILE); } return result; } /** * curl fetch subcommand entry point. * * syntax: curl fetch [--disable-epsv] [--ignore-ssl-cert] [--remote-time] [-u userpass] [--effective-url lasturlvar] [--progress "builtin"|callback] [--enable-compression] url filename * * @param interp current interpreter * @param objc number of parameters * @param objv parameters */ int CurlFetchCmd(Tcl_Interp* interp, int objc, Tcl_Obj* const objv[]) { int theResult = TCL_OK; bool handleAdded = false; FILE* theFile = NULL; char theErrorString[CURL_ERROR_SIZE]; /* Always 0-initialize the error string, since older curl versions may not * initialize the error string buffer at all. See * https://trac.macports.org/ticket/60581. */ theErrorString[0] = '\0'; do { int noprogress = 1; int useepsv = 1; int ignoresslcert = 0; int remotetime = 0; const char* theUserPassString = NULL; const char* effectiveURLVarName = NULL; tcl_callback_t progressCallback = { .interp = interp, .proc = NULL, .prevcalltime = 0.0 }; char* effectiveURL = NULL; char* userAgent = PACKAGE_NAME "/" PACKAGE_VERSION " libcurl/" LIBCURL_VERSION; const int MAXHTTPHEADERS = 100; int numHTTPHeaders = 0; const char* httpHeaders[MAXHTTPHEADERS]; int optioncrsr; int lastoption; const char* theURL; const char* theFilePath; long theFileTime = 0; CURLcode theCurlCode; CURLMcode theCurlMCode; struct curl_slist *headers = NULL; struct CURLMsg *info = NULL; int running; /* number of running transfers */ char* acceptEncoding = NULL; /* we might have options and then the url and the file */ /* let's process the options first */ optioncrsr = 2; lastoption = objc - 3; while (optioncrsr <= lastoption) { /* get the option */ const char* theOption = Tcl_GetString(objv[optioncrsr]); if (strcmp(theOption, "--disable-epsv") == 0) { useepsv = 0; } else if (strcmp(theOption, "--ignore-ssl-cert") == 0) { ignoresslcert = 1; } else if (strcmp(theOption, "--remote-time") == 0) { remotetime = 1; } else if (strcmp(theOption, "-u") == 0) { /* check we also have the parameter */ if (optioncrsr < lastoption) { optioncrsr++; theUserPassString = Tcl_GetString(objv[optioncrsr]); } else { Tcl_SetResult(interp, "curl fetch: -u option requires a parameter", TCL_STATIC); theResult = TCL_ERROR; break; } } else if (strcmp(theOption, "--effective-url") == 0) { /* check we also have the parameter */ if (optioncrsr < lastoption) { optioncrsr++; effectiveURLVarName = Tcl_GetString(objv[optioncrsr]); } else { Tcl_SetResult(interp, "curl fetch: --effective-url option requires a parameter", TCL_STATIC); theResult = TCL_ERROR; break; } } else if (strcmp(theOption, "--user-agent") == 0) { /* check we also have the parameter */ if (optioncrsr < lastoption) { optioncrsr++; userAgent = Tcl_GetString(objv[optioncrsr]); } else { Tcl_SetResult(interp, "curl fetch: --user-agent option requires a parameter", TCL_STATIC); theResult = TCL_ERROR; break; } } else if (strcmp(theOption, "--append-http-header") == 0) { /* check we also have the parameter */ if (optioncrsr < lastoption) { optioncrsr++; if (numHTTPHeaders < MAXHTTPHEADERS) { httpHeaders[numHTTPHeaders++] = Tcl_GetString(objv[optioncrsr]); } else { Tcl_SetResult(interp, "curl fetch: Too many --append-http-header options", TCL_STATIC); theResult = TCL_ERROR; break; } } else { Tcl_SetResult(interp, "curl fetch: --append-http-header option requires a parameter", TCL_STATIC); theResult = TCL_ERROR; break; } } else if (strcmp(theOption, "--progress") == 0) { /* check we also have the parameter */ if (optioncrsr < lastoption) { optioncrsr++; noprogress = 0; progressCallback.proc = Tcl_GetString(objv[optioncrsr]); } else { Tcl_SetResult(interp, "curl fetch: --progress option requires a parameter", TCL_STATIC); theResult = TCL_ERROR; break; } } else if (strcmp(theOption, "--enable-compression") == 0) { acceptEncoding = ""; } else { Tcl_ResetResult(interp); Tcl_AppendResult(interp, "curl fetch: unknown option ", theOption, NULL); theResult = TCL_ERROR; break; } optioncrsr++; } if (optioncrsr <= lastoption) { /* something went wrong */ break; } /* first (second) parameter is -v or the url, second (third) parameter is the file */ if (objc >= 4) { /* Retrieve the url */ theURL = Tcl_GetString(objv[objc - 2]); /* Retrieve the file path */ theFilePath = Tcl_GetString(objv[objc - 1]); } else { Tcl_WrongNumArgs(interp, 1, objv, "fetch [options] url file"); theResult = TCL_ERROR; break; } /* Open the file */ theFile = fopen(theFilePath, "w"); if (theFile == NULL) { Tcl_SetResult(interp, strerror(errno), TCL_VOLATILE); theResult = TCL_ERROR; break; } /* Create the CURL handles */ if (theMHandle == NULL) { /* Re-use existing multi handle if theMHandle isn't NULL */ theMHandle = curl_multi_init(); if (theMHandle == NULL) { theResult = TCL_ERROR; Tcl_SetResult(interp, "error in curl_multi_init", TCL_STATIC); break; } } if (theHandle == NULL) { /* Re-use existing handle if theHandle isn't NULL */ theHandle = curl_easy_init(); if (theHandle == NULL) { theResult = TCL_ERROR; Tcl_SetResult(interp, "error in curl_easy_init", TCL_STATIC); break; } } /* If we're re-using a handle, the previous call did ensure to reset it * to the default state using curl_easy_reset(3) */ /* Setup the handle */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_URL, theURL); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } #if LIBCURL_VERSION_NUM >= 0x071304 && LIBCURL_VERSION_NUM <= 0x071307 /* FTP_PROXY workaround for Snow Leopard */ if (strncmp(theURL, "ftp:", 4) == 0) { char *ftp_proxy = getenv("FTP_PROXY"); if (ftp_proxy) { theCurlCode = curl_easy_setopt(theHandle, CURLOPT_PROXY, ftp_proxy); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } } } #endif /* -L option */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_FOLLOWLOCATION, 1); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* --max-redirs option, same default as curl command line */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_MAXREDIRS, 50); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* echo any cookies received on a redirect */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_COOKIEJAR, "/dev/null"); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* -f option */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_FAILONERROR, 1); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* -A option */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_USERAGENT, userAgent); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* set timeout on connections */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_CONNECTTIMEOUT, _CURL_CONNECTION_TIMEOUT); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* set minimum connection speed */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_LOW_SPEED_LIMIT, _CURL_MINIMUM_XFER_SPEED); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* set timeout interval for connections < min xfer speed */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_LOW_SPEED_TIME, _CURL_MINIMUM_XFER_TIMEOUT); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* skip the header data */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_HEADER, 0); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* write to the file */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_WRITEDATA, theFile); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* we want/don't want progress */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_NOPROGRESS, noprogress); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* we want/don't want a custom progress function */ if (noprogress == 0 && strcmp(progressCallback.proc, "builtin") != 0) { theCurlCode = curl_easy_setopt(theHandle, CURLOPT_PROGRESSDATA, &progressCallback); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } theCurlCode = curl_easy_setopt(theHandle, CURLOPT_PROGRESSFUNCTION, CurlProgressHandler); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } } /* we want/don't want to use epsv */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_FTP_USE_EPSV, useepsv); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* we may want to ignore ssl errors */ if (ignoresslcert) { theCurlCode = curl_easy_setopt(theHandle, CURLOPT_SSL_VERIFYPEER, (long) 0); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } theCurlCode = curl_easy_setopt(theHandle, CURLOPT_SSL_VERIFYHOST, (long) 0); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } } /* we want/don't want remote time */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_FILETIME, remotetime); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* set the l/p, if any */ if (theUserPassString) { theCurlCode = curl_easy_setopt(theHandle, CURLOPT_USERPWD, theUserPassString); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } } /* a CURLOPT_ACCEPT_ENCODING of "" means to let cURL write the * Accept-Encoding header for you, based on what the library * was compiled to support. * A value of NULL disables all attempts at decompressing responses. */ #ifdef _CURL_ENCODING theCurlCode = curl_easy_setopt(theHandle, _CURL_ENCODING, acceptEncoding); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } #endif /* Clear the Pragma: no-cache header */ headers = curl_slist_append(headers, "Pragma:"); /* Append any optional headers */ for (int iH = 0; iH < numHTTPHeaders; ++iH) { headers = curl_slist_append(headers, httpHeaders[iH]); } theCurlCode = curl_easy_setopt(theHandle, CURLOPT_HTTPHEADER, headers); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } theCurlCode = curl_easy_setopt(theHandle, CURLOPT_ERRORBUFFER, theErrorString); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* add the easy handle to the multi handle */ theCurlMCode = curl_multi_add_handle(theMHandle, theHandle); if (theCurlMCode != CURLM_OK) { theResult = SetResultFromCurlMErrorCode(interp, theCurlMCode); break; } handleAdded = true; /* select(2) the file descriptors used by curl and interleave with * checks for TclX signals */ do { int rc; /* select() return code */ /* arguments for select(2) */ int nfds; fd_set readfds; fd_set writefds; fd_set errorfds; struct timeval timeout; long curl_timeout = -1; /* curl_multi_timeout introduced in libcurl 7.15.4 */ #if LIBCURL_VERSION_NUM >= 0x070f04 /* get the next timeout */ theCurlMCode = curl_multi_timeout(theMHandle, &curl_timeout); if (theCurlMCode != CURLM_OK) { theResult = SetResultFromCurlMErrorCode(interp, theCurlMCode); break; } #endif timeout.tv_sec = 1; timeout.tv_usec = 0; /* convert the timeout into a suitable format for select(2) and * limit the timeout to 1 second at most */ if (curl_timeout >= 0 && curl_timeout < 1000) { timeout.tv_sec = 0; /* convert ms to us */ timeout.tv_usec = curl_timeout * 1000; } /* get the fd sets for select(2) */ FD_ZERO(&readfds); FD_ZERO(&writefds); FD_ZERO(&errorfds); theCurlMCode = curl_multi_fdset(theMHandle, &readfds, &writefds, &errorfds, &nfds); if (theCurlMCode != CURLM_OK) { theResult = SetResultFromCurlMErrorCode(interp, theCurlMCode); break; } /* The value of nfds is guaranteed to be >= -1. Passing nfds + 1 to * select(2) makes the case of nfds == -1 a sleep. */ rc = select(nfds + 1, &readfds, &writefds, &errorfds, &timeout); if (-1 == rc) { /* check for signals first to avoid breaking our special * handling of SIGINT and SIGTERM */ if (Tcl_AsyncReady()) { theResult = Tcl_AsyncInvoke(interp, theResult); if (theResult != TCL_OK) { break; } } /* select error */ Tcl_SetResult(interp, strerror(errno), TCL_VOLATILE); theResult = TCL_ERROR; break; } /* timeout or activity */ theCurlMCode = curl_multi_perform(theMHandle, &running); /* process signals from TclX */ if (Tcl_AsyncReady()) { theResult = Tcl_AsyncInvoke(interp, theResult); if (theResult != TCL_OK) { break; } } } while (running > 0); /* Find out whether the transfer succeeded or failed. */ info = curl_multi_info_read(theMHandle, &running); if (running > 0) { fprintf(stderr, "Warning: curl_multi_info_read has %d more structs available\n", running); } /* free header memory */ curl_slist_free_all(headers); /* signal cleanup to the progress callback */ if (noprogress == 0 && strcmp(progressCallback.proc, "builtin") != 0) { CurlProgressCleanup(&progressCallback); } /* check for errors in the loop */ if (theResult != TCL_OK || theCurlMCode != CURLM_OK) { break; } /* we should always get CURLMSG_DONE unless we aborted due to a Tcl * signal */ if (info == NULL) { Tcl_SetResult(interp, "curl_multi_info_read() returned NULL", TCL_STATIC); theResult = TCL_ERROR; break; } if (info->msg != CURLMSG_DONE) { snprintf(theErrorString, sizeof(theErrorString), "curl_multi_info_read() returned unexpected {.msg = %d, .data.result = %d}", info->msg, info->data.result); Tcl_SetResult(interp, theErrorString, TCL_VOLATILE); theResult = TCL_ERROR; break; } if (info->data.result != CURLE_OK) { /* execution failed, use the error string if it is set */ if (theErrorString[0] != '\0') { Tcl_SetResult(interp, theErrorString, TCL_VOLATILE); } else { /* When the error buffer does not hold useful information, * generate our own message. Use a larger buffer since we add * a significant amount of text. */ char errbuf[256 + CURL_ERROR_SIZE]; snprintf(errbuf, sizeof(errbuf), "curl_multi_info_read() returned {.msg = CURLMSG_DONE, " ".data.result = %d (!= CURLE_OK)}, but the error buffer " "is not set. curl_easy_strerror(.data.result): %s", info->data.result, curl_easy_strerror(info->data.result)); Tcl_SetResult(interp, errbuf, TCL_VOLATILE); } theResult = TCL_ERROR; break; } /* close the file */ (void) fclose(theFile); theFile = NULL; #if LIBCURL_VERSION_NUM == 0x070d01 /* work around broken Tiger version of curl */ if (remotetime) { FILE *fp; char *tmp, *p; char buf[BUFSIZ]; size_t size; tmp = tmpnam(NULL); fp = fopen(tmp, "w"); if (fp == NULL) { Tcl_SetResult(interp, strerror(errno), TCL_VOLATILE); theResult = TCL_ERROR; break; } theFile = fopen(theFilePath, "r"); if (theFile == NULL) { Tcl_SetResult(interp, strerror(errno), TCL_VOLATILE); theResult = TCL_ERROR; break; } if ((p = fgets(buf, BUFSIZ, theFile)) != NULL) { /* skip stray header escaping into output */ if (strncmp(p, "Last-Modified:", 14) != 0) rewind(theFile); } while ((size = fread(buf, 1, BUFSIZ, theFile)) > 0) { fwrite(buf, 1, size, fp); } (void) fclose(theFile); theFile = NULL; fclose(fp); if (rename(tmp, theFilePath) != 0) { Tcl_SetResult(interp, strerror(errno), TCL_VOLATILE); theResult = TCL_ERROR; break; } } #endif if (remotetime) { theCurlCode = curl_easy_getinfo(theHandle, CURLINFO_FILETIME, &theFileTime); if (theCurlCode == CURLE_OK && theFileTime > 0) { struct utimbuf times; times.actime = (time_t)theFileTime; times.modtime = (time_t)theFileTime; utime(theFilePath, ×); /* set the time we got */ } } /* If --effective-url option was given, set given variable name to last effective url used by curl */ if (effectiveURLVarName != NULL) { theCurlCode = curl_easy_getinfo(theHandle, CURLINFO_EFFECTIVE_URL, &effectiveURL); Tcl_SetVar(interp, effectiveURLVarName, (effectiveURL == NULL || theCurlCode != CURLE_OK) ? "" : effectiveURL, 0); } } while (0); if (handleAdded) { /* Remove the handle from the multi handle, but ignore errors to avoid * cluttering the real error info that might be somewhere further up */ curl_multi_remove_handle(theMHandle, theHandle); handleAdded = false; } /* reset the connection */ if (theHandle != NULL) { curl_easy_reset(theHandle); } if (theFile != NULL) { fclose(theFile); } return theResult; } /** * curl isnewer subcommand entry point. * * @param interp current interpreter * @param objc number of parameters * @param objv parameters */ int CurlIsNewerCmd(Tcl_Interp* interp, int objc, Tcl_Obj* const objv[]) { int theResult = TCL_OK; FILE* theFile = NULL; do { int optioncrsr; int lastoption; int ignoresslcert = 0; long theResponseCode = 0; const char* theURL; CURLcode theCurlCode; long theModDate; long userModDate; optioncrsr = 2; lastoption = objc - 3; while (optioncrsr <= lastoption) { /* get the option */ const char* theOption = Tcl_GetString(objv[optioncrsr]); if (strcmp(theOption, "--ignore-ssl-cert") == 0) { ignoresslcert = 1; } else { Tcl_ResetResult(interp); Tcl_AppendResult(interp, "curl isnewer: unknown option ", theOption, NULL); theResult = TCL_ERROR; break; } optioncrsr++; } if (optioncrsr <= lastoption) { /* something went wrong */ break; } /* first (second) parameter is the url, second (third) parameter is the date */ if (objc < 4 || objc > 5) { Tcl_WrongNumArgs(interp, 1, objv, "isnewer [--ignore-ssl-cert] url date"); theResult = TCL_ERROR; break; } /* Retrieve the url */ theURL = Tcl_GetString(objv[objc - 2]); /* Get the date */ theResult = Tcl_GetLongFromObj(interp, objv[objc - 1], &userModDate); if (theResult != TCL_OK) { break; } /* Open the file (dev/null) */ theFile = fopen("/dev/null", "a"); if (theFile == NULL) { Tcl_SetResult(interp, strerror(errno), TCL_VOLATILE); theResult = TCL_ERROR; break; } /* Create the CURL handle */ if (theHandle == NULL) { /* Re-use existing handle if theHandle isn't NULL */ theHandle = curl_easy_init(); } /* If we're re-using a handle, the previous call did ensure to reset it * to the default state using curl_easy_reset(3) */ /* Setup the handle */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_URL, theURL); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* -L option */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_FOLLOWLOCATION, 1); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* --max-redirs option, same default as curl command line */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_MAXREDIRS, 50); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* echo any cookies received on a redirect */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_COOKIEJAR, "/dev/null"); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* -f option */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_FAILONERROR, 1); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* set timeout on connections */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_CONNECTTIMEOUT, _CURL_CONNECTION_TIMEOUT); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* set minimum connection speed */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_LOW_SPEED_LIMIT, _CURL_MINIMUM_XFER_SPEED); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* set timeout interval for connections < min xfer speed */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_LOW_SPEED_TIME, _CURL_MINIMUM_XFER_TIMEOUT); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* write to the file */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_WRITEDATA, theFile); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* we may want to ignore ssl errors */ if (ignoresslcert) { theCurlCode = curl_easy_setopt(theHandle, CURLOPT_SSL_VERIFYPEER, (long) 0); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } theCurlCode = curl_easy_setopt(theHandle, CURLOPT_SSL_VERIFYHOST, (long) 0); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } } /* save the modification date */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_FILETIME, 1); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* skip the download if the file wasn't modified */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_TIMECONDITION, CURL_TIMECOND_IFMODSINCE); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } theCurlCode = curl_easy_setopt(theHandle, CURLOPT_TIMEVALUE, userModDate); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* we do not want any progress */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_NOPROGRESS, 1); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* actually fetch the resource */ theCurlCode = curl_easy_perform(theHandle); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* close the file */ (void) fclose(theFile); theFile = NULL; /* check everything went fine */ theCurlCode = curl_easy_getinfo(theHandle, CURLINFO_HTTP_CODE, &theResponseCode); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } theModDate = -1; if (theResponseCode != 304) { /* get the modification date */ theCurlCode = curl_easy_getinfo(theHandle, CURLINFO_FILETIME, &theModDate); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* compare this with the date provided by user */ if (theModDate < -1) { Tcl_SetResult(interp, "Couldn't get resource modification date", TCL_STATIC); theResult = TCL_ERROR; break; } } if (theModDate > userModDate) { Tcl_SetResult(interp, "1", TCL_STATIC); } else { Tcl_SetResult(interp, "0", TCL_STATIC); } } while (0); /* reset the connection */ if (theHandle != NULL) { curl_easy_reset(theHandle); } if (theFile != NULL) { fclose(theFile); } return theResult; } /** * curl getsize subcommand entry point. * * @param interp current interpreter * @param objc number of parameters * @param objv parameters */ int CurlGetSizeCmd(Tcl_Interp* interp, int objc, Tcl_Obj* const objv[]) { int theResult = TCL_OK; FILE* theFile = NULL; do { int optioncrsr; int lastoption; int ignoresslcert = 0; char theSizeString[32]; const char* theURL; CURLcode theCurlCode; double theFileSize; optioncrsr = 2; lastoption = objc - 2; while (optioncrsr <= lastoption) { /* get the option */ const char* theOption = Tcl_GetString(objv[optioncrsr]); if (strcmp(theOption, "--ignore-ssl-cert") == 0) { ignoresslcert = 1; } else { Tcl_ResetResult(interp); Tcl_AppendResult(interp, "curl getsize: unknown option ", theOption, NULL); theResult = TCL_ERROR; break; } optioncrsr++; } if (optioncrsr <= lastoption) { /* something went wrong */ break; } /* first (second) parameter is the url */ if (objc < 3 || objc > 4) { Tcl_WrongNumArgs(interp, 1, objv, "getsize [--ignore-ssl-cert] url"); theResult = TCL_ERROR; break; } /* Retrieve the url */ theURL = Tcl_GetString(objv[objc - 1]); /* Open the file (dev/null) */ theFile = fopen("/dev/null", "a"); if (theFile == NULL) { Tcl_SetResult(interp, strerror(errno), TCL_VOLATILE); theResult = TCL_ERROR; break; } /* Create the CURL handle */ if (theHandle == NULL) { /* Re-use existing handle if theHandle isn't NULL */ theHandle = curl_easy_init(); } /* If we're re-using a handle, the previous call did ensure to reset it * to the default state using curl_easy_reset(3) */ /* Setup the handle */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_URL, theURL); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* -L option */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_FOLLOWLOCATION, 1); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* --max-redirs option, same default as curl command line */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_MAXREDIRS, 50); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* echo any cookies received on a redirect */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_COOKIEJAR, "/dev/null"); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* -f option */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_FAILONERROR, 1); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* set timeout on connections */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_CONNECTTIMEOUT, _CURL_CONNECTION_TIMEOUT); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* set minimum connection speed */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_LOW_SPEED_LIMIT, _CURL_MINIMUM_XFER_SPEED); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* set timeout interval for connections < min xfer speed */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_LOW_SPEED_TIME, _CURL_MINIMUM_XFER_TIMEOUT); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* write to the file */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_WRITEDATA, theFile); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* we may want to ignore ssl errors */ if (ignoresslcert) { theCurlCode = curl_easy_setopt(theHandle, CURLOPT_SSL_VERIFYPEER, (long) 0); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } theCurlCode = curl_easy_setopt(theHandle, CURLOPT_SSL_VERIFYHOST, (long) 0); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } } /* skip the header data */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_HEADER, 0); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* skip the body data */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_NOBODY, 1); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* we do not want any progress */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_NOPROGRESS, 1); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* actually fetch the resource */ theCurlCode = curl_easy_perform(theHandle); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* close the file */ (void) fclose(theFile); theFile = NULL; theFileSize = 0.0; /* get the file size */ theCurlCode = curl_easy_getinfo(theHandle, CURLINFO_CONTENT_LENGTH_DOWNLOAD, &theFileSize); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } (void) snprintf(theSizeString, sizeof(theSizeString), "%.0f", theFileSize); Tcl_SetResult(interp, theSizeString, TCL_VOLATILE); } while (0); /* reset the connection */ if (theHandle != NULL) { curl_easy_reset(theHandle); } if (theFile != NULL) { fclose(theFile); } return theResult; } /** * curl post postdata url * * syntax: curl post [--user-agent useragentstring] [--progress "builtin"|callback] postdata url * * @param interp current interpreter * @param objc number of parameters * @param objv parameters */ int CurlPostCmd(Tcl_Interp* interp, int objc, Tcl_Obj* const objv[]) { int theResult = TCL_OK; FILE* theFile = NULL; do { const char* theURL; const char* thePostData; CURLcode theCurlCode; int noprogress = 1; tcl_callback_t progressCallback = { .interp = interp, .proc = NULL, .prevcalltime = 0.0 }; char* userAgent = PACKAGE_NAME "/" PACKAGE_VERSION " libcurl/" LIBCURL_VERSION; int optioncrsr; int lastoption; /* we might have options and then postdata and the url */ /* let's process the options first */ optioncrsr = 2; lastoption = objc - 3; while (optioncrsr <= lastoption) { /* get the option */ const char* theOption = Tcl_GetString(objv[optioncrsr]); if (strcmp(theOption, "--user-agent") == 0) { /* check we also have the parameter */ if (optioncrsr < lastoption) { optioncrsr++; userAgent = Tcl_GetString(objv[optioncrsr]); } else { Tcl_SetResult(interp, "curl post: --user-agent option requires a parameter", TCL_STATIC); theResult = TCL_ERROR; break; } } else if (strcmp(theOption, "--progress") == 0) { /* check we also have the parameter */ if (optioncrsr < lastoption) { optioncrsr++; noprogress = 0; progressCallback.proc = Tcl_GetString(objv[optioncrsr]); } else { Tcl_SetResult(interp, "curl post: --progress option requires a parameter", TCL_STATIC); theResult = TCL_ERROR; break; } } else { Tcl_ResetResult(interp); Tcl_AppendResult(interp, "curl post: unknown option ", theOption, NULL); theResult = TCL_ERROR; break; } optioncrsr++; } if (optioncrsr <= lastoption) { /* something went wrong */ break; } /* first (second) parameter is -v or the url, second (third) parameter is the file */ if (objc >= 4) { /* Retrieve the url - it is the last parameter */ theURL = Tcl_GetString(objv[objc - 1]); /* Retrieve the post data - it's before the url */ thePostData = Tcl_GetString(objv[objc - 2]); } else { Tcl_WrongNumArgs(interp, 1, objv, "post [options] postdata file"); theResult = TCL_ERROR; break; } /* Open the file (dev/null) */ theFile = fopen("/dev/null", "a"); if (theFile == NULL) { Tcl_SetResult(interp, strerror(errno), TCL_VOLATILE); theResult = TCL_ERROR; break; } /* Create the CURL handle */ if (theHandle == NULL) { /* Re-use existing handle if theHandle isn't NULL */ theHandle = curl_easy_init(); } /* If we're re-using a handle, the previous call did ensure to reset it * to the default state using curl_easy_reset(3) */ /* Setup the handle */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_URL, theURL); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* Specify the POST data */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_POSTFIELDS, thePostData); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* -L option */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_FOLLOWLOCATION, 1); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* --max-redirs option, same default as curl command line */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_MAXREDIRS, 50); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* echo any cookies received on a redirect */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_COOKIEJAR, "/dev/null"); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* -f option */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_FAILONERROR, 1); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* -A option */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_USERAGENT, userAgent); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* set timeout on connections */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_CONNECTTIMEOUT, _CURL_CONNECTION_TIMEOUT); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* set minimum connection speed */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_LOW_SPEED_LIMIT, _CURL_MINIMUM_XFER_SPEED); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* set timeout interval for connections < min xfer speed */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_LOW_SPEED_TIME, _CURL_MINIMUM_XFER_TIMEOUT); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* write to the file */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_WRITEDATA, theFile); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* skip the header data */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_HEADER, 0); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* we want/don't want progress */ theCurlCode = curl_easy_setopt(theHandle, CURLOPT_NOPROGRESS, noprogress); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* we want/don't want a custom progress function */ if (noprogress == 0 && strcmp(progressCallback.proc, "builtin") != 0) { theCurlCode = curl_easy_setopt(theHandle, CURLOPT_PROGRESSDATA, &progressCallback); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } theCurlCode = curl_easy_setopt(theHandle, CURLOPT_PROGRESSFUNCTION, CurlProgressHandler); if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } } /* actually perform the POST */ theCurlCode = curl_easy_perform(theHandle); /* signal cleanup to the progress callback */ if (noprogress == 0 && strcmp(progressCallback.proc, "builtin") != 0) { CurlProgressCleanup(&progressCallback); } if (theCurlCode != CURLE_OK) { theResult = SetResultFromCurlErrorCode(interp, theCurlCode); break; } /* close the file */ (void) fclose(theFile); theFile = NULL; } while (0); /* reset the connection */ if (theHandle != NULL) { curl_easy_reset(theHandle); } if (theFile != NULL) { fclose(theFile); } return theResult; } /** * curl command entry point. * * @param clientData custom data (ignored) * @param interp current interpreter * @param objc number of parameters * @param objv parameters */ int CurlCmd( ClientData clientData UNUSED, Tcl_Interp* interp, int objc, Tcl_Obj* const objv[]) { typedef enum { kCurlFetch, kCurlIsNewer, kCurlGetSize, kCurlPost } EOption; static const char *options[] = { "fetch", "isnewer", "getsize", "post", NULL }; int theResult = TCL_OK; EOption theOptionIndex; static pthread_once_t once = PTHREAD_ONCE_INIT; /* TODO: use dispatch_once when we drop Leopard support */ pthread_once(&once, CurlInit); if (objc < 3) { Tcl_WrongNumArgs(interp, 1, objv, "option ?arg ...?"); return TCL_ERROR; } theResult = Tcl_GetIndexFromObj( interp, objv[1], options, "option", 0, (int*) &theOptionIndex); if (theResult == TCL_OK) { switch (theOptionIndex) { case kCurlFetch: theResult = CurlFetchCmd(interp, objc, objv); break; case kCurlIsNewer: theResult = CurlIsNewerCmd(interp, objc, objv); break; case kCurlGetSize: theResult = CurlGetSizeCmd(interp, objc, objv); break; case kCurlPost: theResult = CurlPostCmd(interp, objc, objv); break; } } return theResult; } /** * curl init entry point. * libcurl will never be cleaned (where should I plug the hook?) */ void CurlInit(void) { curl_global_init(CURL_GLOBAL_ALL); } /* ========================================================================= ** * Callback function * ========================================================================= */ static int CurlProgressHandler( tcl_callback_t *callback, double dltotal, double dlnow, double ultotal, double ulnow) { if (dltotal == 0.0 && ultotal == 0.0 && dlnow == 0.0 && ulnow == 0.0) { /* * We have no idea whether this is an up- or download. Do nothing for now. */ return 0; } enum { UPLOAD, DOWNLOAD } transferType; double total, now, speed, curtime; if (dltotal != 0.0 || dlnow != 0.0) { /* This is a download */ transferType = DOWNLOAD; total = dltotal; now = dlnow; } else { /* This is an upload */ transferType = UPLOAD; total = ultotal; now = ulnow; } /* Only send updates once a second */ curl_easy_getinfo(theHandle, CURLINFO_TOTAL_TIME, &curtime); if ((curtime - callback->prevcalltime) < _CURL_MINIMUM_PROGRESS_INTERVAL) { return 0; } if (callback->prevcalltime == 0.0) { /* this is the first time we're calling the callback, call start * subcommand first */ /* * Command string, a space followed "start", another space and "dl" or * "ul" plus the trailing \0. */ char startCommandBuffer[strlen(callback->proc) + (1 + 5) + (1 + 2) + 1]; int startLen = 0; startLen = snprintf(startCommandBuffer, sizeof(startCommandBuffer), "%s start %s", callback->proc, (transferType == DOWNLOAD) ? "dl" : "ul"); if (startLen < 0 || (size_t) startLen >= sizeof(startCommandBuffer)) { /* overflow */ fprintf(stderr, "pextlib1.0: buffer overflow in " __FILE__ ":%d. Buffer is: %s\n", __LINE__, startCommandBuffer); abort(); } if (TCL_ERROR == Tcl_EvalEx(callback->interp, startCommandBuffer, startLen, TCL_EVAL_GLOBAL)) { fprintf(stderr, "curl progress callback failed: %s\n", Tcl_GetStringResult(callback->interp)); return 1; } } callback->prevcalltime = curtime; /* Get the average speed from curl */ if (transferType == DOWNLOAD) { curl_easy_getinfo(theHandle, CURLINFO_SPEED_DOWNLOAD, &speed); } else { curl_easy_getinfo(theHandle, CURLINFO_SPEED_UPLOAD, &speed); } /* * We need the command string, a space and "update", another space and "dl" * or "ul", three doubles converted to string (see comment below), plus * a space character for separation per argument, so 3 * (1 + LEN_DOUBLE) * plus one character for the null-byte. */ char commandBuffer[strlen(callback->proc) + (1 + 6) + (1 + 2) + 3 * (1 + 12) + 1]; int len = 0; /* * Format numbers using % .6g format specifier so we can always be sure * what the total length will be: .6g tells us we're using at most * 6 significant digits; that means 6 characters, another one for * a possible decimal point, another 4 for e+XX where 00 <= XX <= 99 for * exponents, and another one for a possible sign (or " " for positive * numbers). In total, the maximum length will be 12 per double formatted. */ len = snprintf(commandBuffer, sizeof(commandBuffer), "%s update %s % .6g % .6g % .6g", callback->proc, (transferType == DOWNLOAD) ? "dl" : "ul", total, now, speed); if (len < 0 || (size_t) len >= sizeof(commandBuffer)) { /* overflow */ fprintf(stderr, "pextlib1.0: buffer overflow in " __FILE__ ":%d. Buffer is: %s\n", __LINE__, commandBuffer); abort(); } /* * Execute directly rather than compiling to bytecode first - the script is * likely to change in the next call anyway. */ if (TCL_ERROR == Tcl_EvalEx(callback->interp, commandBuffer, len, TCL_EVAL_GLOBAL)) { fprintf(stderr, "curl progress callback failed: %s\n", Tcl_GetStringResult(callback->interp)); return 1; } return 0; } static void CurlProgressCleanup( tcl_callback_t *callback) { /* * Transfer complete, signal the progress callback */ Tcl_InterpState state; /* * Command string, a space followed "finish" plus the trailing \0. */ char commandBuffer[strlen(callback->proc) + (1 + 6) + 1]; int len = 0; len = snprintf(commandBuffer, sizeof(commandBuffer), "%s finish", callback->proc); if (len < 0 || (size_t) len >= sizeof(commandBuffer)) { /* overflow */ fprintf(stderr, "pextlib1.0: buffer overflow in " __FILE__ ":%d. Buffer is: %s\n", __LINE__, commandBuffer); abort(); } /* make sure to save and restore the interpreter state so a potential error * message doesn't get lost */ state = Tcl_SaveInterpState(callback->interp, 0); Tcl_EvalEx(callback->interp, commandBuffer, len, TCL_EVAL_GLOBAL); Tcl_RestoreInterpState(callback->interp, state); }